Skip to discussions
Renewable Energy Hub Find an Installer Compare prices Detailed Quote
Installer Directory
Community forum Sign inJoin community
Invite to forum

Choose who to invite in your sharing app. They’ll still need to sign up or sign in to take part.

WhatsApp Email
Solar & Batteries

Do solar panels need cleaning in the UK? What Energy Saving Trust says about rain, lichen and bird mess

Share thread
WhatsApp Email
Richard Burdett Admin: Current forum administrator.Super Contributor: Special recognition for the quality and helpfulness of contributions. Member ·
#94
Energy Saving Trust published a guide on 1 October, and it's more relaxed than the cleaning company adverts. The short version: in most cases rain does a good job, so routine cleaning isn't essential. They suggest checking panels every 12 to 18 months and cleaning if there's visible dirt, and say a light clean every 12 to 24 months can help a system perform at its best. You might need to do it more often if you: - live somewhere dry and dusty, or near farmland or a busy road - have trees close by, or lichen or regular bird droppings - have ground-mounted panels, which tend to collect more dirt than angled roof panels How they say to do it: - Use a hosepipe and, if needed, a soft long-handled brush or sponge from the ground. Water alone is best because washing-up liquid can leave residue. - Switch the system off first and check for damaged cabling. If you see any, stop and tell your installer. - Pick a cool day so water doesn't dry streaky. - Don't stand on panels and don't use a pressure washer, because it can affect seals and wiring. - If you can't reach safely from the ground, use a professional rather than working at height. Professional cleaning typically starts at around £60 to £100 for a standard system. EST also mentions inverters usually need replacing every 10 to 15 years, at roughly £800. If you're curious how much dirt might matter, our guide on how much electricity a solar panel produces covers the factors that affect output. Has anyone noticed a difference in output before and after a clean, and how did you measure it?
Share post
WhatsApp Email

Your experience could help someone.

Join to ask a follow-up or share your perspective.

Join to reply