Air source heat pumps are permitted development in England if all the limits and conditions are met, so no planning application is needed. From the Planning Portal's current list:
- The installation has to comply with MCS planning standards (MCS 020a). From 28 May 2026 that's the only permitted certification scheme.
- The outdoor compressor unit (including its housing) can't be bigger than 1.5 cubic metres on a house, or 0.6 cubic metres on a block of flats.
- Only the first installation counts on a house that isn't detached or on a block of flats. On a detached house, the first two do.
- Not on a pitched roof. On a flat roof it has to be at least one metre from the roof's outer edge.
- Not within the curtilage of a listed building, or on a scheduled monument.
- In a conservation area or World Heritage Site, it can't be on a wall or roof that faces a highway, or be nearer the highway than the building.
- Elsewhere, it can't be on a wall above ground-floor level if that wall faces a highway.
- It can't be used only for cooling, and it should be sited to minimise its effect on the building's appearance and the area.
Permitted development rights can also be removed by an Article 4 direction or a planning condition, which is why it's worth checking with your local planning authority.
That only covers planning, not noise or neighbours. We've talked about the noise side here: How do we avoid heat pump noise becoming a problem for neighbours?
Our heat pump pros and cons guide also touches on the planning side, if you want a plainer summary.
Has anyone had to ask a council for confirmation, and did they issue a lawful development certificate?